看大家是否有兴趣。。站内联系吧。。。。
　
　
??????????????????
　
　
Staff / Senior Hardware Engineer (50796BR)
You will be responsible for development and maintenance of electronics hardware systems for Industrial Control products such as Controllers, I/O Modules, Communications Modules and Power Supply Modules. You will be required to define design specifications, develop and implement electronic designs, troubleshoot design anomalies, conduct validation/compliance tests, and create design and product documentation. You will engage in these activities to drive manufacturability, cost optimization and quality in products delivered. You are required to have a strong capability to lead and engage solutions through cross-functional teams. You need to possess a passion and drive to bring in timely solutions for design challenges and anomaly resolution.
Requirements:
? Degree in Electrical/Electronics Engineering or equivalent
? Minimum 8 years of electronics design experience in majority of areas listed below:
o Design of 5V/24V/120V/240V I/O circuits with Transistors and Relays
o Design of Isolation Circuits with opto-couplers, transformer and digital isolators
o Design of A/D, Voltage/Current Mode D/A and DC-DC Power Supply circuits
o Design of Analog Signal Conditioning circuits (e.g. filtering and amplification)
? Proficient in PCB Schematic Capture and PCB Board Layout design
? Proficient in EMI noise reduction techniques/ countermeasures
? Proven capability in designing and conducting tests to qualify products for Environmental, EMC and Safety Standards
? Experience in Platform Development
? Experience in using Circuit Simulation and Analysis Software Tools for Analog Design
? Experience in leading a technical project team and working with multi-site project team
? Experience in microprocessor/microcontroller circuits would be advantageous
? Experience in AC-DC Power Supply circuits and Digital Filtering Algorithms would be advantageous
? Experience in Functional Safety product development with IEC61508 preferred
Staff / Senior Hardware Engineer (50797BR)
You will be responsible for development and maintenance of electronics hardware systems for Industrial Control products such as Controllers, I/O Modules, Communications Modules and Power Supply Modules. You will be required to define design specifications, develop and implement electronic designs, troubleshoot design anomalies, conduct validation/compliance tests, and create design and product documentation. You will engage in these activities to drive manufacturability, cost optimization and quality in products delivered. You are required to have a strong capability to lead and engage solutions through cross-functional teams. You need to possess a passion and drive to bring in timely solutions for design challenges and anomaly resolution.
Requirements:
? Degree in Electrical/Electronics Engineering or equivalent
? Minimum 8 years of electronics design experience in majority of areas listed below:
Microprocessor/Microcontroller controller boards for embedded systems with 16 and 32 bit commercial processors
o Memory technologies, e.g. SRAM, DRAM, SDRAM, DDRAM, NOR and NAND flash
o Communication interfaces, e.g. Ethernet, CAN, USB and Serial RS232/RS485
o DC-DC Power Supplies for Digital Electronics
o Selection and design of programmable logic devices, e.g. FPGA’s and CPLD’s
? Proficient in PCB Schematic Capture and PCB Board Layout design
? Proficient in EMI noise reduction techniques/countermeasures
? Proven capability in designing and conducting tests to qualify products for Environmental, EMC and Safety Standards
? Experience in Platform Development, Signal Integrity Optimization and in tools for Timing Analysis
? Experience in leading a technical project team and working with multi-site project team
? Experience in Functional Safety product development with IEC61508 preferred
Senior / Hardware Engineer (50798BR)
You will be responsible for development and maintenance of electronics hardware systems for Industrial Control products such as Controllers, I/O Modules, Communications Modules and Power Supply Modules. You will be required to define design specifications, develop and implement electronic designs, troubleshoot design anomalies, conduct validation/compliance tests, and create design and product documentation. You will engage in these activities to drive manufacturability, cost optimization and quality in products delivered. You are required to have a strong capability to lead and engage solutions through cross-functional teams. You need to possess a passion and drive to bring in timely solutions for design challenges and anomaly resolution.
Requirements:
? Degree in Electrical/Electronics Engineering or equivalent
? Minimum 2 years of relevant hardware design experience in one or more of the following areas:
o Microprocessor/Microcontroller system based preferably with ARM processor experience
o Logic Design and Implementation with FPGA/CPLD/PAL devices
o Analog Circuit Simulation and Design
o Ethernet and USB design, testing and certification
? Proven capability to carry out product testing for Environmental and Certification Test Standards
? Experience in designing to EMC/EMI/ESD and safety regulatory certifications
? Experience in EMI noise reduction techniques/countermeasures and PCB layout
? Experience in working with cross-functional and multi-site project teams
? Experience with design analysis tools ranging from schematic capture, signal integrity and Timing Analysis
? Experience in Functional Safety product development with IEC61508 preferred
　
Staff / Senior Embedded Software Engineer, Functional Safety (50912BR)
You will be responsible for the development of functionally safe firmware/embedded software for the next-generation Safety I/O modules. You will also take the lead in the creation and review of safety requirements, safety concept, safety integrity level studies, design documents, code and test specifications. This is in accordance with engineering best practices/processes, and in partnership with team members across the globe. You will also need to possess the working knowledge of creation and debugging of embedded/software applications. In addition, you will participate in or conduct technical reviews with peers to identify problems early in the development phases, as well as required to demonstrate the ability to consistently meet project deliverables and work effectively in a diverse team environment.
Requirements:
? Degree/Masters in Computer Science/ Embedded Systems or Computer/ Electrical /Electronics Engineering, with focus on Embedded Software
? Minimum 8 years of relevant experience in developing Real Time Embedded Systems to meet functional safety standards (IEC 61508 and IEC 61794). Candidates with more years of experience can be considered for Staff position
? CFSP/CFSE or TUV Functional Safety Engineer Certification
? Experience in all phases of safety product lifecycle according to IEC 61508
? Strong knowledge of C/C++ language and MISRA coding standards
? Experience in automation control system will be an added advantage
? Experience in reliability and statistical analysis, such as FMEA
? Experience in development of one or more of the following areas for embedded system:
o Programming of 32 bits Microcontroller (ARM or ColdFire)
o Development of RTOS, such as VxWorks, ThreadX or others
o Development of communication protocols like Ethernet/USB/WIFI and CAN/Profibus
o Development of low level drivers
? Good analysis skills and proven ability to solve complex problems as well as experience in using different hardware-assisted debugging tools
? Good communication and interpersonal skills, as well as be able to work independently and in a team in a multi-cultural environment
? Open-minded, willingness to experiment within acceptable boundaries and a creative mind to bring novel solutions into design and problem-solving
Staff / Senior Embedded Software Engineer (50913BR)
You will be responsible for the design, development, test and support of firmware/embedded software applications for existing and next generation Microcontroller and I/O modules. This is in accordance with engineering best practices/processes, and in partnership with team members across the globe. You will also need to possess the working knowledge of creation and debugging of embedded/software applications. In addition, you will participate in or conduct technical reviews with peers to identify problems early in the development phases, as well as required to demonstrate the ability to consistently meet project deliverables and work effectively in a diverse team environment.
Requirements:
? Degree/Masters in Computer Science/ Embedded Systems or Computer/ Electrical /Electronics Engineering, with focus on Embedded Software
Minimum 8 years of relevant experience in developing Real Time Embedded Systems. Candidates with more years of experience can be considered for either Senior or Staff position
? Experience in industrial control systems and functional safety is a great advantage
? Strong knowledge of C/C++ language
? Experience in programming 32 bits Microcontroller ( ARM or ColdFire ) and developing low level device driver
? Experience in development of one or more of the following areas for embedded system:
o Development with RTOS, such as VxWorks, ThreadX or others
o Development of communication protocols like Ethernet/USB/WIFI and CAN/Profibus
o Automated unit test methodology
? Good analysis skills and proven ability to solve complex problems as well as experience in using different hardware-assisted debugging tools
? Good communication and interpersonal skills, as well as be able to work independently and in a team in a multi-cultural environment
? Open-minded, willingness to experiment within acceptable boundaries and a creative mind to bring novel solutions into design and problem-solving
Embedded Software Engineer (50914BR)
You will be responsible for the design, development, test and support of firmware/embedded software applications for existing and next generation Microcontroller and I/O modules. This is in accordance with engineering best practices/processes, and in partnership with team members across the globe. You will also need to possess the working knowledge of creation and debugging of embedded/software applications. In addition, you will participate in or conduct technical reviews with peers to identify problems early in the development phases, as well as required to demonstrate the ability to consistently meet project deliverables and work effectively in a diverse team environment.
Requirements:
? Degree/Masters in Computer Science/ Embedded Systems or Computer/ Electrical /Electronics Engineering, with focus on Embedded Software
? Minimum1-2 years of relevant experience in developing Real Time Embedded Systems. Candidates without experience may also apply
? Strong knowledge of C/C++ language
? Knowledge in one or more of the following areas will be an added advantage:
o 32 bits Microcontroller (e.g. ARM, ColdFire or others)
o Real Time Operating System (e.g. VxWorks, ThreadX or others)
o Communication protocols (e.g. Ethernet/USB, CAN/Profibus or others)
o Automated unit test methodology
? Good communication and interpersonal skills, as well as be able to work independently and in a team in a multi-cultural environment
? Open-minded, willingness to experiment within acceptable boundaries and a creative mind to bring novel solutions into design and problem-solving
Staff / Senior Embedded Firmware Test Engineer (50803BR)
You will be responsible for utilizing product domain knowledge and sound engineering practices to lead or participate in the development and execution of firmware functional tests for Programmable Logic Controller (PLC), Input/Output (I/O) or Human Machine Interface (HMI) products. You have to understand and translate requirements, design/functional specifications to define test strategies or requirements, as well as perform test coverage analysis to design test plans and test cases.
You will participate in project meeting and peers reviews for product design(s) & documentation, construct test bed(s) and develop test ware to execute functional tests. You will also create test scripts to automate testing and execute them; testing will include new products launches, new firmware features, regression testing and firmware enhancement/modification. In addition, you will report progress on test execution and highlight issues/blockers; report, track and verify anomalies; work closely with development to resolve any found issues and participate in test improvement initiatives.
Requirements:
? Degree in Electrical/Electronics/Mechanical Engineering, Computer Science or related fields
? Minimum 3 years of experience in embedded firmware testing
? Industry experience in field engineering, integration or testing in an industrial automation application system is advantageous
? Programming experience/knowledge on PLC, python or other scripting languages is advantageous
? Experience/knowledge on Ethernet and TCP/IP communication protocols is advantageous
? Good understanding of software development lifecycle and testing methodologies/concepts
? Good analytical and troubleshooting skills
? Ability to work in teams or independently, action-oriented and possess strong drive for results
? Strong communication and interpersonal skills
Embedded Firmware Test Engineer (50804BR)
You will be responsible for utilizing product domain knowledge and sound engineering practices to lead or participate in the development and execution of firmware functional tests for Programmable Logic Controller (PLC), Input/Output (I/O) or Human Machine Interface (HMI) products. You have to understand and translate requirements, design/functional specifications to define test strategies or requirements, as well as perform test coverage analysis to design test plans and test cases.
You will participate in project meeting and peers reviews for product design(s) & documentation, construct test bed(s) and develop test ware to execute functional tests. You will also create test scripts to automate testing and execute them; testing will include new products launches, new firmware features, regression testing and firmware enhancement/modification. In addition, you will report progress on test execution and highlight issues/blockers; report, track and verify anomalies; work closely with development to resolve any found issues and participate in test improvement initiatives.
Requirements:
? Degree in Electrical/Electronics/Mechanical Engineering, Computer Science or related fields
? Minimum 2 years of experience in embedded firmware testing
? Industry experience in field engineering, integration or testing in an industrial automation application system is advantageous
? Programming experience/knowledge on PLC, python or other scripting languages is advantageous
? Experience/knowledge on Ethernet and TCP/IP communication protocols is advantageous
? Good understanding of software development lifecycle and testing methodologies/concepts
? Good analytical and troubleshooting skills
? Ability to work in teams or independently, action-oriented and possess strong drive for results
? Strong communication and interpersonal skills
? Candidates without experience or with less than 2 years of relevant firmware testing experience, but are passionate in testing may apply for Engineer position
Staff/Senior Hardware Engineer (45315BR)
You will be responsible for the development and maintenance of electronics hardware for Industrial Control products such as Controllers, I/O Modules, Communications Modules and Power Supply Modules. You will engage in development and maintenance activities of products that include definition of design specifications, development and implementation of circuits, troubleshooting designs, conducting validation/compliance tests, and creation of design and product documentation. You will engage in these activities to drive cost optimization, manufacturability and quality in products delivered. You should have a strong capability to lead and engage solutions through cross functional teams. You need to possess a passion and drive to bring in timely solutions for design challenges and anomaly resolutions.
Requirements:
? Degree in Electrical or Electronics Engineering or related qualification
? Minimum 8 years proven electronics design experience in majority of areas listed below by order of relevance for this position
o Design of 5V/24V/120V/240V I/O circuits with Transistors and Relays
o Design of Isolation Circuits with opto-couplers, transformer and digital isolators
o Design of A/D circuits and Voltage/Current Mode D/A circuits
o Design of DC-DC Power Supply circuits
o Design of Analog Signal Conditioning circuits (eg: filtering and amplification).
o Use of PCB Schematic Capture and Board Layout Tools eg Mentor Graphics
o Able to design and conduct tests to qualify products for Environmental, EMC and Safety Standards
o Experience in using Circuit Simulation and Analysis Software Tools for Analog Design is preferred.
o Experience in microprocessor/microcontroller circuits would be an advantage.
o Experience in AC-DC Power Supply Circuits would be an advantage
o Experiences in Digital Filtering Algorithms would be an advantage
Staff/Senior Hardware Engineer (49224BR)
You will be responsible for the development and maintenance of electronics hardware for Industrial Control products such as Controllers, I/O Modules, Communications Modules and Power Supply Modules. You will engage in development and maintenance activities of products that include definition of design specifications, development and implementation of circuits, troubleshooting designs, conducting validation/compliance tests, and creation of design and product documentation. You will engage in these activities to drive cost optimization, manufacturability and quality in products delivered. You should have a strong capability to lead and engage solutions through cross functional teams. You need to possess a passion and drive to bring in timely solutions for design challenges and anomaly resolutions.
Requirements:
? Degree in Electrical or Electronics Engineering or related qualification
? Minimum 8 years proven electronics design experience in majority of areas listed below by order of relevance for this position
o Designing Microprocessor/Microcontroller controller boards for embedded systems with 16 and 32 bit commercial processors
o Design Experience with memory technologies, eg SRAM, DRAM, SDRAM, DDRAM, NOR and NAND flash.
o Design Experience with communication interfaces, eg Ethernet, CAN, USB and Serial RS232/RS485
o Experience in design of DC-DC Power Supplies for Digital Electronics
o Design Experience with selection and design of programmable logic devices, eg FPGA’s and CPLD’s
o Use of PCB Schematic Capture and Board Layout Tools eg Mentor Graphics
o Design Experience with Signal Integrity and Power Integrity optimization
o Able to design and conduct tests to qualify products for Environmental, EMC and Safety Standards
Senior Embedded Software Engineer, Logix (49330BR)
You will be responsible for the development, testing and support of Embedded Software for Logix Controllers, our latest generation of industrial automation controllers. You will be part of a multi-functional project team to deliver the product according to committed schedule, scope, quality and cost. Your responsibilities will include activities related to requirements, design, coding, reviews, testing, documentation and resolving customer anomalies.
Requirements:
? Degree/Master in Computer Science/Computer Engineering/ Electrical Electronic Engineering with specific focus on Real Time Software Engineering.
? Minimum 5 years of relevant experience in developing Real Time Embedded Systems, using object-oriented analysis and design, in C and C++.
? Experience with microcontroller architecture (ARM) and RTOS (e.g. VxWorks,ThreadX).
? Experience in low level driver development and communication protocols (e.g. Ethernet/TCP/IP, CAN, EtherCAT).
? Experience in industrial control systems is a great advantage.
? Possess good analytical skills and has proven track record in resolving complex problems. Experience with using different hardware-assisted debugging tools.
? Possess good communication and interpersonal skills. Is able to work both independently and in a team, in a multi-site, multi-cultural environment.
? Is open-minded with a willingness to experiment and a creative mind to bring novel ideas into design and problem-solving.
Software Engineer (50137BR)
You will be a member of our software development team to develop cutting-edge software product for industry automation, and be responsible for designing and implementing new requirements, resolving customer issues for our industrial automation programming software. You will be working closely with product marketing to identify the customer needs and come up with innovative software solutions to address the needs.
Requirements:
? Degree in Computer Engineering, Computer Science or equivalent
? Minimum 3 years' experience in Windows-based software product application development using C#/WinForm/WPF using Object-Oriented methodology
? Good debugging and problem solving skills
? Experience in ClearCase and ClearQuest will be an advantage
? Some knowledge with Visual Studio Shell based development and industrial automation will be a plus
Senior Manufacturing Test Engineer (49809BR)
You will be part of the Manufacturing Test team providing technical support to test related processes in production. You will improve and maintain test yields and work with various departments to resolve
issues seen at the testers.
Responsibilities:
1. Drives productivity, and perform Kazan on the production floor.
2. Reducing cycle time, stabilizing tests, and eliminating redundant process steps. Must be capable in understanding schematics, test codes, test requirements.
3. Modify test codes and test fixtures for improvement.
4. Write up testers’ operation instructions, perform new process buy-off.
5. Identify root cause for failures on units returned from customers and production.
Requirements:
? Degree in Electrical/Electronic Engineering.
? Min 5 years working experience in manufacturing or development environment.
? Possess leadership Skill in People Management
? Possess Strategic and Resource Planing
? Hands on experience in Functional test, High potential test and Programming.
? Able to code test program in C/C++, and NI Teststand.
? Knowledge in Six Sigma tools will be an added advantage.
? Possess good communication and presentation skills.
? Independent, and possess hands-on experience in various test equipment.
Embedded Function/System Functional Test Engineer
(1-year contract with benefits) (48626BR)
You will be responsible to utilize product domain knowledge and sound engineering practices to carry out embedded firmware and system testing activities for our automation controller products.
Responsibilities:
1. Understand and translate requirements, design/functional specifications to define test strategies or requirements, perform test coverage analysis to design test plans and test cases
2. Participate in project meetings, and peers reviews for product design(s) & documentation
3. Construct test bed(s), develop test ware to execute functional and system tests
4. Create test scripts to automate testing and execute them
5. Perform regression testing
6. Report progress on test execution and highlight issues/blockers
7. Report, track and verify anomalies
Requirements:
? Degree in Electrical/Electronics/Mechanical Engineering, Computer Science or related fields
? Min 3 years’ industry experience in firmware functional testing
? Industry experience in field engineering, integration or testing in an industrial automation application system is advantageous
? Programming experience/knowledge of PLC, python or scripting languages is advantageous
? Good understanding of software development life cycle and testing methodologies/concepts
? Good analytical and troubleshooting skills
? Ability to work in teams or independently, action-oriented, and possesses strong drive for results
? Strong communication and interpersonal skills
Mechanical Engineer (1-year contract with benefits) (TBA)
You will be a member of cross functional research and development teams which develop leading edge products for use in industrial environments. You will also perform engineering assignments as part of a major project or of a complete project. You will demonstrate creativity in developing solutions which will allow Rockwell Automation to maintain our position as an Industrial leader. You will create innovative designs suitable for low volume / high mix production, and define and supervise engineering tests to qualify designs. Your job content includes some detailed documentation tasks and product maintenance and you will provide the necessary “hands-on” expertise to resolve complex, cross-functional issues regarding product functionality, assembly methods and product qualification while meeting aggressive product cost targets and schedules. You will communicate effectively via sketches, drawings and engineering reports. You will also interact daily with peers and customers (typically internal) to exchange or present factual information. Builds stable working relationships internally.
Requirements:
? Degree in Mechanical Engineering (or equivalent experience).
? Minimum 5 years experience in mechanical design engineering.
? Experience in taking a design from concept design to production.
? Experience in plastic and sheet metal design with capabilities in cost estimation.
? Experience in mechanical modules interconnectivity design & PCBA mechanical assembly constraint design.
? Proficient in the use of a 3D Solid Modeling CAD system (preferably Pro/ENGINEER Creo2) and ANSI geometric tolerance.
? Familiar with SAP, Design for Manufacturing, Design for Six Sigma, Design for Assembly and FEA tools.
? Good understanding of multi action tooling fabrication techniques to support complex plastic injection molded or dies cast components.
? Good interpersonal skills, work independently within a matrix organisation.
? Multi-tasking, prior project and team management experience
Business Analyst (1-year contract with benefits) (51030BR)
You will be responsible for the development of monthly independent demand plan for 5 global business units working closely with the Rockwell Automation global marketing and business management team located in Asia Pacific Business Center. You will also work closely with regional demand planners located in EMEA and APAC to develop regional demand plans. Sharing demand information with finished goods planners for both Rockwell plants and for external manufacturers is an integral part of the job. You will be chairing the monthly Sales and Operations Planning meeting for the 5 business units with the overall objective of ensuring timely delivery of products to our global customers. You will also be frequently called upon to provide analytical decision support assistance to business management.
Requirements:
? Bachelor degree in Business Admin or equivalent
? Minimum 3 to 5 years of working experience in demand forecasting, supply chain, or business analysis
? Strong analytical capabilities, with a deep understanding of financial modeling and statistical analysis techniques
? Track record of delivering insightful and actionable reporting and business analysis to drive management decisions
? Strong leadership skills, good communication skills and strong execution skills
? Ability to work long hours with evening calls with overseas counterparts
Engineering Assistant, Firmware (1-year contract with benefits) (51249BR)
You will support in Firmware release process and analyze and make changes of MM and DIR in SAP. You will also coordinate with the Engineering group to ensure that all effective dates, revision status, BOM changes, rework instructions are correct. You will interpret documents such as BOMs, ECOs, operating and procedure manuals and develop and maintain the knowledge base for ECN/ECR related tasks. You will also support purchasing of engineering equipment for build or internal evaluation and other documentation control in department. You will support and maintain development test setup, including wiring and installation
Requirements:
? Diploma in Engineering (Electrical / Electronics / Computer).
? Knowledge in SAP PLM, especially BOM, Document, ECR/ECO will be an advantage
? Excellent in documentation and using Microsof Office (Excel/Word/Visio)
? Knowledge in programming language as C/Java/Python will be advantage
? Fast learner and team player with good interpersonal and communication skills
? Well-organized and pay attention to detail
? Strong analytic skills and multitasking abilities as well as identifying and resolving issues with limited supervision
? Candidates with no experience are welcome to apply
Machine Engineering Assistant (1-year contract with benefits) (49494BR)
You will provide assistance to Process and Equipment Engineering in the areas of machine, tooling and process improvements.
Requirements:
? Degree/Diploma in Mechanical or Electrical/Electronic Engineering or equivalent knowledge in the application of engineering principles, issues and concepts.
? Min 2 years’ experience of SMT (Surface Mount Technology) and AOI (Automated Optical Inspection).
? Knowledge of soldering workmanship standards.
? Requires set up, operation and maintenance of machines or workstations.
? Able to perform machine troubleshooting.
? Knowledge on PCBA manufacturing and able to corrects quality problems as they arise.