两个圆角的方块下面应该有螺丝或空心铆钉。
用刀或电笔翘开看下。
空心铆钉的话用电钻打孔的方法去掉。
10 个回答
+1
五金店有把手，前几天买了一个9块的样子
谢谢！！用螺丝刀把小方片撬开了！
里面是螺丝 :D
感觉自己棒棒哒
谢谢万能的华新网友
想问一下，你图片里面左侧黄色小垫块哪里有卖的
五金店找了一圈，只有右侧把手卖的，但是没有左边那个垫片买
这么贵吗
便宜的有一两块的
我家的也坏了
正准备买了
我不知道哎
搬进来就有了
不是HDB自带的就是前屋主买的…
我家楼下杂货店的三块
还可以的样子
对啊，一定找小店买
home fix东西很贵
【装修】求教 HDB窗户把手坏了怎么换？
There are 2 types of handle latch , one screw on each side and 2 screws on each side , you take out the existing
one ( remove rectangle cover) and bring to hardware shop to get the same hole position type ( you no need to drill
hole again ) , the left hand side plate not easy to buy , after fixed the RHS latch , try to close , if the old LHS plastic plate
block the closing , you either 1. remove the LHS plate or 2. remove or file /cut the plastic tip on new RHS latch.
1 screw on each side of the latch type is cheaper as some one saying $3 each and the 2 screws on each side type its more
expensive , if your quantity is only one , it is not worth to search for whole seller to buy at $2-3 each , just get from your
neighborhood hard wear shop will do. Happy DIY